Server Info...

  Sauron started life with me as a HP Netserver LH II that I received for doing some computer work.

It initially had:
(2) Pentium II 333 MHz Processors
(2) 128 MB ECC 60ns Dimms
(6) 4.2 GB 7200 RPM Ultra SCSI Hot Swap Hard Drives
(1) HP Netraid 1si Raid Controller
(1) Matrox Millennium II 2 MB Video Card
(1) Intel Pro 100 Network Card 

Fixed up original:
(2) Pentium II 333 MHz Processors
(4) 128 MB ECC 60ns Dimms
(6) 9.1 GB 10,000 RPM Wide Ultra SCSI Hot Swap Hard Drives - On HP Array Channel 0
(1) 4 GB 7200 RPM SCSI Hard Drive - Internal Boot Drive
(1) Matrox Millennium II 2 MB  Video Card
(1) HP Netraid 3si Raid Controller
(1) Compaq Smart Array 2DH Raid Controller
(1) 3Com 980 Server Network Card
(1) Compaq Storage System /F2
(2) 9.1 GB 10,000 RPM Wide Ultra SCSI Hot Swap Hard Drives - On HP Array Channel 1
(4) 4.2 GB 7200 RPM Ultra SCSI Hot Swap Hard Drives - On HP Array Channel 1
(6) 4.3 GB 10,000 RPM Wide Ultra SCSI Hot Swap Hard Drives - On Compaq Array Channel 0 

The new and improved Sauron is now:
In a NetFrame enclosed half-rack on casters.

In the Compaq Tasksmart N2400 without SAN Array:
(2) Pentium III 733 MHz Processors
(3) 256 MB PC133 ECC Dimms
(1) 4/8 DDS 2 SCSI Tape Drive
(1) 9.1 GB 7200 RPM Ultra Wide SCSI Hard Drive (for the OS)
(1) Compaq Remote Insight Board Lights Out Edition
(1) Integrated Smart Array Controller(1) ATI Video Onboard and on RiLOE card
(1) Compaq 10/100 MB Integrated Network card
(2) Compaq Smart Array 2-DH Controllers

In the Rack:(2) Compaq Storage System /U2 Drive Arrays – 12 bay
(1) Compaq Storage System /F2 Drive Array – 12 Bay
(2) 2 Channel Drive Array controller boards
(1) Bridged Drive Array controller board
(26) 4.3 GB 7200 RPM Ultra Wide SCSI Drives with Hot-Swap Trays
(7) 9.1 GB 7200 RPM Ultra Wide SCSI Drives with Hot-Swap Trays 

On top of the rack:
(1) Spare power supply for drive arrays
(1) Spare Dual channel controller board for drive arrays
(1) Spare fan array for drive arraysMisc extra drives and hot-swap trays